Saturday 10 June 2017

Making soap with lard


Obviously rendering pig fat is a fascinating subject judging by the number of comments on my last post :-) Well....here is what I did with some of the end product and I am reasonably happy with my first lard 'experiment' and learned something new during the process. 

As mentioned in previous posts I had read the new eBook Make Your Own Natural Soap by Farmer Liz from Eight Acres and was keen to use the lard in a batch of soap. I was also very naughty and purchased this gorgeous soap mould which I really didn't need but couldn't resist it and was busting to use it.




I didn't want to start off my lard soap experiments with 100% lard so added olive oil and coconut oil (copha) as well. I decided to try the new clays I have bought so once I had the lye added to the oils/lard and brought it to a light trace which I must say did take a lot longer than usual as normally my soap gets to trace within a minute or so when using the stick blender. 




Then I divided the mixture into two and had prepared some red clay and also yellow clay as I was thinking I might end up with a reddish colour in one batch and a light yellow in another. In the past I hadn't used enough clay to get much colour so prior to starting I used a heaped teaspoon of each in separate containers and added some of the 500g oils. I then used a little milk frother which I bought from the $2 shop and mixed it up well with the oils before becoming occupied with the rest of the process. 

However when it came time to add the red clay it was so gluggy that it was difficult to get it out of the container so in the end I left half of it behind which was just as well as it turned out to be a lot redder than I expected so then there was a bit of panic as I tried to incorporate it into the oil and lard mixture before going to a thick trace. 





Finally I was able to pour it into the moulds and then realised that I had to wash the red clay off the stick blender which was coated in the stuff and was hard to wash off. Then coming back to the yellow clay which fortunately hadn't turned out to be so gluggy I added it to the mixture and then remembered I had forgotten to add the essential oils before dividing it into two so all of the cream soaps ended up having all the scent. Oh well! I am not 21 anymore and can't remember everything I have to :-)




As I have a penchant for taking my soap out of the moulds before they are really hard enough to come out I was determined to wait for a couple of days to do that. However, I just had a little 'fiddle' the next day and took out the one in the photo with the two colours which was what was left over in the jugs and it came out of the mould perfectly. So there was no stopping me then and the rest of the red roses were unmoulded and unfortunately had a few air bubbles even though I had tried to avoid that but I left the white soap for another few hours then had a peek at one 'flower'. Well I was really chuffed that it came out perfectly too so then they were all unmoulded and I resisted the urge to touch them again as often my fingernails get caught on the soap and mark it. 



Obviously more yellow clay would be needed to achieve an actual yellow colour and I am not sure I will use the red clay again as I think it would be better used in a mask and hopefully one wouldn't end up with a red face. LOL! Knowing me I will probably try though and just use a small amount.

Not wanting the soap to discolour I didn't use fragrance oils but had some essential oils which really needed to be used up and these were rosemary and lemon which probably aren't a good combination but it does smell okay. I don't buy essential oils anymore as they are very expensive and a little bottle can cost up to $20 and even that isn't enough for a batch of soap. I did buy mine on special at a health food shop but they are cheaper to buy from a soap supplier like Aussie Soap Supplies although you also have to factor in the cost of postage.

Here is the recipe if anyone is interested. I always like to keep a record of what recipe I have used as you can't tell till you use a soap what it is going to feel like on the skin. Having a record is really helpful.  I used the SoapCalc calculator for working out how much water and lye to use. If I make this again I will try the Brambleberry lye calculator and see if there is any difference. 

Lard Soap with Olive Oil and Coconut Oil

500g Lard
250g Coconut Oil (I used copha)
250g Olive Oil
143g Caustic Soda
380g Water
30g   Rosemary and Lemon Essential Oils
1t      Red Clay (1 heaped teaspoon was much too much for 1/2 the batch)
1t      Yellow Clay (1 heaped teaspoon was much too little for 1/2 the batch)


Next time I will get the amount of clays right. Of course I will!!!!!




23 comments:

  1. The red ones look like little chocolate cakes. I'm imagining that the soap will be really hard & creamy, look forward to hearing what they're like.

    ReplyDelete
    Replies
    1. Karen, I hope it will be hard. Now to wait six weeks :-)

      Delete
  2. Such beautiful soaps. I love the details on white ones.

    ReplyDelete
  3. It is fascinating... it doesnt seem possible something so nice could be made from something that seems so icky to begin with! I know the process but I don't UNDERSTAND it!
    Your soaps are beautiful! This knowledge is valuable! To be able to make something so useful from something else that is thrown away most of the time. Very nice moulds too! xxx

    ReplyDelete
    Replies
    1. It is fascinating, Annabel and a good way to use the all the parts of the animal rather than wasting it.

      Delete
  4. I think I would be like you and pop, them out of the moulds early. Your soaps look great, well done.
    Kylie

    ReplyDelete
    Replies
    1. Patience isn't my forte, Kylie. I have a few batches of soap to prove that too. LOL!

      Delete
  5. The proof is always in the pudding though. Or in this case, lather. Let us know when it comes to using them, if you notice a difference with the lard soap. I think you did a great job, and they turned out beautifully.

    ReplyDelete
    Replies
    1. I'll let you know Chris. Hopefully there is hardness and lather too.

      Delete
  6. Your soaps look lovely, Chel. I wonder what the soap will be like to use? I like you new soap mould too. Meg:)

    ReplyDelete
    Replies
    1. Yes Meg, the worst part of soapmaking is waiting for the curing to take place. Then again, I could try hot process soap. Now that's an idea :-)

      Delete
  7. Looks good .Good work love your soap.I have just taken my souer dough out of the fridge fed it and it is already bubbling thanks again cheers affussa moi

    ReplyDelete
    Replies
    1. Moi, I hope Gertrude is behaving herself. She would like the warmer weather up there.

      Delete
  8. Just wonderful. It makes my soapy heart glad.

    ReplyDelete
    Replies
    1. I love it Mr.HM....'my soapy heart'. I needed a laugh.

      Delete
  9. Chel, your soaps are beautiful. Thinking ahead, it makes me want to try my hand at making some for Christmas gifts.

    ReplyDelete
    Replies
    1. Thanks Priscilla. Thanks for visiting. Yes give it a try and I am sure you will thoroughly enjoy the process if you haven't had a go already.

      Delete
  10. Hi there. Beautiful soaps! I too make soap and have been using lard for years. If you use Lard only the bars are great as stain removers for your laundry or to grate up for laundry soap. I add one cup of lard soap grated plus a cup of borax and a cup of washing soda for my laundry soap. I also love to use clays to color my soap but they do indeed accelerate the trace process. Try some turmeric powder for orange and yellow colors. Works nicely.

    ReplyDelete
    Replies
    1. Hi Donna. I will try the lard in lard in laundry soap although as I usually make my own but don't add borax as we use our grey water. Thanks for the tips about using turmeric. That has also been on my list to experiment with in soapmaking.

      Delete
  11. I am so impressed by what you are doing with your soap making Chel, however it really seems quite scientific.They are very pretty as well. Your Christmas gifts are sorted already:) One day could you let us know which of your recipes would suit sensitive skins the best and then I will read your previous posts and try to come up with a basic kit to start with. Thanks for sharing.

    ReplyDelete
  12. Pauline, I started off by reading what Rhonda had written about soap on her blog and in her first book and then I printed out this tutorial http://down---to---earth.blogspot.com.au/2007/07/how-to-make-cold-pressed-soap.html and followed it step by step for my first batch. You can also use copha instead of coconut oil as it is cheaper. Rhonda has sensitive skin so doesn't add scent or colours to her soap. I make smaller batches than that one now and use 1000g oils instead of 1500g like in that recipe. Also using a stick blender makes the process much quicker but Rhonda uses an old mixmaster. You can email me if you have more questions and I will see if I can help.

    ReplyDelete
  13. Oh yay! Pleased to see you did an animal fat based soap. I really like your new soap mold and I'm not a flowery person :).

    ReplyDelete

Thanks so much for leaving your comments as I love to hear from my readers. As soon as I check them they will be published. If for some reason you have trouble leaving a comment feel free to email me directly by filling out the 'Contact Me' form on the sidebar at the right.

Printfriendly

Related Posts Plugin for WordPress, Blogger...